Trademaster H.D. Clamp 800mmx140mm 1200kgp (Changeable Pads) Worksharp Net Weight: 18kg WARNING -

Net Weight: 18kg WARNING - Do Not Operate Over 125 psi IMPORTANT - A compressor capable of supplying air at a rate of 6-19CFM is required (minimum 3

Interchangeable: RYCO

545 Pieces Replacement Packs Available Part # Size Pack Qty C500-1 1/4 x 9/16 50 C500-2 5/16 x 11/16 50 C500-3 3/8 x 3/4 50 C500-4 7/16 x 13/16 50 C500-5 1/2 x 7/8 50 C500-6 9/16 x 15/16 50 C500-7 5/8 x 1 50 C500-8 11/16 x 1-1/16 45 C500-9 3/4 x 1-1/8 45 C500-10 13/16 x 1-3/16 30 C500-11 7/8 x 1-1/4 30 C500-12 15/16 x 1-3/8 15 C500-13 1 x 1-1/2 15 C500-14 1-1/8 x 1-3/4 15

Side Cutter Chrome molybdenum steel

Set of 8 pliers two pairs of water pump pliers two pairs of combination pliers two pairs of side cutters and two pairs of flat nose pliers

Trademaster H.D. Clamp 800mmx140mm 1200kgp (Changeable Pads) Worksharp Net Weight: 18kg WARNING -EHOMA H. D. CLAMP 800MM X 140MM 1200KGP (CHANGEABLE PADS) Three replaceable clamping pads are available and can be quickly replaced Hexagon design of the screws end is good for reinforced clamping The clamping pressure is measured at the span of 150mm